Dyness
Dyness Stack100 20.48 kWh energy storage system, HV, with heating
Product Code: UCC020
€4,975.00 You save €593.00
What’s included
-
Dyness STACK100 BDU Controller
-
Dyness STACK100 S51100 5.12 kWh battery module
× 4
In stock
Description
Dyness Stack100 20.48 kWh is a high-voltage stack consisting of four 51.2 V / 100 Ah LiFePO4 battery modules. The configuration has 20.48 kWh nominal energy, 204.8 V nominal voltage and a maximum charge/discharge current of 100 A.
The Stack100 datasheet lists CAN/RS485 communication, a built-in Wi-Fi module, 95% depth of discharge and at least 8000 cycles. Its IP20 protection rating is intended for indoor installation. The product record is marked with self-heating; the series datasheet describes low-temperature charging support as an optional configuration, so the supplied configuration must be confirmed before ordering.
For the four-module configuration, the datasheet gives 590 × 765 × 390 mm dimensions. It must be paired with a compatible high-voltage inverter and installed to the manufacturer’s current electrical, ventilation and safety requirements.
Specifications
- Capacity: 20.48 kWh
- Maximum current: 100 A
- Pre-heating: Yes
- Depth of discharge: 95 %
- Warranty: 10 years
- Operating temperature: Charging 0–55 °C; discharging −20–55 °C
- Dimensions: 590 × 765 × 390 mm
- Nominal voltage: 204.8 V
- Depth of Discharge (DoD): 95%
- Number of modules: 4
- Protection Class (IP): IP20
- Cooling: Forced air cooling
- Connectivity: CAN, RS485, Wi-Fi
- Number of cycles / Service life: ≥ 8000
- Voltage type: Aukšta įtampa (HV)
- Battery type: LiFePO4
- Maximum charge / discharge current: 100 A
-aukštos-įtampos-baterijų-sist-medium.webp)
